Please help
First of all, i'm sorry: perhaps this solution it's already posted but I've read all the FAQs and the forum for 2 hours and i didn't find it.
I've modify my config.ini file with the translations for my pioneerSR80 and i forgot find&change the CR/LF simbols in UltraEdit, so i put a corrupted config.ini in my empeg (arggghh!!! i'm idiot!!!!)
The result is that my empeg doesn't respond. It claims an eternal ir_translate error.
With Hyperterminal i can't press q so fast to stop the boot process and get shell.
I've tried upgrading again with soft 2.00beta11 and Hijack, but it's the same.
- upgrading soft 2.00beta11: the upgrade runs ok with emplode but the player boots and doesn'¡t respond, only show de logo.
--------after upgrade 2.00beta11 over previos hijack---------
empeg-car bootstrap v1.02 20001106 (hugo@empeg.com)
If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Penguins of Linux!
e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux..................................... done, booting the kerne
l.
Linux version 2.2.14-rmk5-np17-empeg50 (mac@aphex.internal.empeg.com) (gcc versi
on 2.95.3 20010315 (release)) #7 Fri Feb 8 18:45:38 GMT 2002
Processor: Intel StrongARM-1100 revision 11
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 9, serial number 30102748)
Command line: mem=16m
Calibrating delay loop... 207.67 BogoMIPS
Memory: 15024k/16M available (964k code, 20k reserved, 372k data, 4k init)
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 16384 bhash 16384)
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Linux-IrDA: IrCOMM protocol ( revision:Tue May 18 03:11:39 1999 )
ircomm_tty: virtual tty driver for IrCOMM ( revision:Wed May 26 00:49:11 1999 )
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is 206f6972 'rio '
empeg display initialised.
empeg dsp audio initialised
empeg dsp mixer initialised
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0
empeg remote control/panel button initialised.
empeg usb initialised, PDIUSBD12 id 1012
empeg state support initialised 0089/88c1 (save to d0005080).
empeg RDS driver initialised
empeg power-pic driver initialised (first boot)
RAM disk driver initialized: 16 RAM disks of 4096K size
empeg single channel IDE
Probing primary interface...
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: IBM-DJSA-210, 9590MB w/384kB Cache, CHS=19485/16/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu)
SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:26:0a:b
c
Partition check:
hda: hda1 < hda5 hda6 > hda2 hda3 hda4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 4k initempeg init 0.8
I see this is a developer image!
Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
Mounting second music partition
Tried to mount /dev/hdc4 but got error 6
Error mounting partitions (possibly already mounted)
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
Press 'q' now to go into development mode. You Have Zero Seconds To ComðStarting
player
player(7): memory violation at pc=0x020d79a4, lr=0x020d7954 (bad address=0x0b14a
c91, code 2)
pc : [<020d79a4>] lr : [<020d7954>]
sp : bffffd84 ip : bffffda4 fp : bffffda0
r10: 02146b34 r9 : 02146da0 r8 : 0214ac98
r7 : 0b14ac8d r6 : 02145fa8 r5 : 0214ac89 r4 : 09000004
r3 : 00000000 r2 : 09000004 r1 : 0214ac89 r0 : 02145fa8
Flags: nZCv IRQs on FIQs on Mode USER_32 Segment user
Control: C0F7517D Table: C0F7517D DAC: 00000015
Function entered at [<020d7984>] from [<020d7954>]
r7 = 0214AC91 r6 = 0214BFC8 r5 = 0214AC89 r4 = 02145FA8
Function entered at [<020d78ac>] from [<020bf1d8>]
r5 = BFFFFE98 r4 = 00000001
Function entered at [<020bf154>] from [<0209c678>]
r10 = BFFFFE80 r9 = 02146DA0 r8 = 0214AC98 r7 = 0214AC91
r6 = 0214BFC8 r5 = BFFFFE98 r4 = 00000001
Function entered at [<0209c084>] from [<02072084>]
r10 = 02030E64 r9 = 00000000 r8 = 0210C4F8 r7 = 00000000
r6 = 02146CF0 r5 = 00000000 r4 = 02146D1C
Function entered at [<02071fac>] from [<0207b0b8>]
r10 = 02030E64 r9 = 00000000 r8 = 0210C4F8 r7 = 00000000
r6 = 020000C0 r5 = BFFFFF64 r4 = 02146AF4
Function entered at [<0207b0a0>] from [<02109444>]
Function entered at [<02109420>] from [<020000d4>]
r4 = 00000001
Function entered at [<020000c0>] from [<020c3330>]
Function entered at [<020c326c>] from [<02000104>]
r10 = 00000000 r8 = 00000000 r7 = 00000000 r6 = 00000000
r5 = 00000000 r4 = 00000000
Restored terminal settings
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
Abnormal player termination
Player received signal 11
Starting player
player(8): memory violation at pc=0x020d79a4, lr=0x020d7954 (bad address=0x0b14a
c91, code 2)
pc : [<020d79a4>] lr : [<020d7954>]
sp : bffffd84 ip : bffffda4 fp : bffffda0
r10: 02146b34 r9 : 02146da0 r8 : 0214ac98
r7 : 0b14ac8d r6 : 02145fa8 r5 : 0214ac89 r4 : 09000004
r3 : 00000000 r2 : 09000004 r1 : 0214ac89 r0 : 02145fa8
Flags: nZCv IRQs on FIQs on Mode USER_32 Segment user
Control: C0F7517D Table: C0F7517D DAC: 00000015
Function entered at [<020d7984>] from [<020d7954>]
r7 = 0214AC91 r6 = 0214BFC8 r5 = 0214AC89 r4 = 02145FA8
Function entered at [<020d78ac>] from [<020bf1d8>]
r5 = BFFFFE98 r4 = 00000001
Function entered at [<020bf154>] from [<0209c678>]
r10 = BFFFFE80 r9 = 02146DA0 r8 = 0214AC98 r7 = 0214AC91
r6 = 0214BFC8 r5 = BFFFFE98 r4 = 00000001
Function entered at [<0209c084>] from [<02072084>]
r10 = 02030E64 r9 = 00000000 r8 = 0210C4F8 r7 = 00000000
r6 = 02146CF0 r5 = 00000000 r4 = 02146D1C
Function entered at [<02071fac>] from [<0207b0b8>]
r10 = 02030E64 r9 = 00000000 r8 = 0210C4F8 r7 = 00000000
r6 = 020000C0 r5 = BFFFFF64 r4 = 02146AF4
Function entered at [<0207b0a0>] from [<02109444>]
Function entered at [<02109420>] from [<020000d4>]
r4 = 00000001
Function entered at [<020000c0>] from [<020c3330>]
Function entered at [<020c326c>] from [<02000104>]
r10 = 00000000 r8 = 00000000 r7 = 00000000 r6 = 00000000
r5 = 00000000 r4 = 00000000
Restored terminal settings
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
-------------------------------------------------
- after uploading hijack (with logoeditor) i get again the same ir_translate config error.
------- hijack over 2.00beta1---------------
empeg-car bootstrap v1.02 20001106 (hugo@empeg.com)
If there is anyone present who wants to upgrade the flash, let them speak now,
or forever hold their peace...it seems not. Let fly the Penguins of Linux!
e000 v1.04
Copying kernel...
Calling linux kernel...
Uncompressing Linux....................................... done, booting the ker
nel.
Linux version 2.2.14-rmk5-np17-empeg50-hijack-v270 (root@tbird.localnet) (gcc ve
rsion 2.95.3 20010315 (release)) #2 Thu May 30 11:17:16 EDT 2002
Processor: Intel StrongARM-1100 revision 11
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.
empeg-car player (hardware revision 9, serial number 30102748)
Command line: mem=16m
Calibrating delay loop... 207.67 BogoMIPS
Memory: 14952k/16M available (1040k code, 20k reserved, 368k data, 4k init)
Dentry hash table entries: 2048 (order 2, 16k)
Buffer cache hash table entries: 16384 (order 4, 64k)
Page cache hash table entries: 4096 (order 2, 16k)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 16384 bhash 16384)
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Linux-IrDA: IrCOMM protocol ( revision:Tue May 18 03:11:39 1999 )
ircomm_tty: virtual tty driver for IrCOMM ( revision:Wed May 26 00:49:11 1999 )
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is 206f6972 'rio '
empeg display initialised.
empeg dsp audio initialised
empeg dsp mixer initialised
empeg dsp initialised
empeg audio-in initialised, CS4231A revision a0
empeg remote control/panel button initialised.
empeg usb initialised, PDIUSBD12 id 1012
empeg state support initialised 0089/88c1 (save to d0005180).
empeg RDS driver initialised
empeg power-pic driver initialised (first boot)
RAM disk driver initialized: 16 RAM disks of 4096K size
empeg single channel IDE
Probing primary interface...
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
hda: IBM-DJSA-210, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: IBM-DJSA-210, 9590MB w/384kB Cache, CHS=19485/16/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu)
SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:26:0a:b
c
Partition check:
hda: hda1 < hda5 hda6 > hda2 hda3 hda4
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
empeg-pump v0.03 (19980601)
Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 4k initqempeg init 0.8
I see this is a developer image!
Mounting proc
Mounting first music partition
Tried to mount /dev/hda4 as reiserfs but got error 19
Mounting second music partition
Tried to mount /dev/hdc4 but got error 6
Error mounting partitions (possibly already mounted)
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
Press 'q' now to go into development mode. You Have Zero Seconds To ComðStarting
player
q
[ir_translate] ERROR: : "AD520A.B"
[ir_translate] ERROR: : "AD520B.A"
khttpd: listening on port 80
kftpd: listening on port 21
Restored terminal settings
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
q
Abnormal player termination
Player received signal 11
Starting player
[ir_translate] ERROR: : "AD520A.B"
[ir_translate] ERROR: : "AD520B.A"
Restored terminal settings
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
Abnormal player termination
Player received signal 11
Starting player
[ir_translate] ERROR: : "AD520A.B"
[ir_translate] ERROR: : "AD520B.A"
Restored terminal settings
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
Abnormal player termination
Player received signal 11
Starting player
[ir_translate] ERROR: : "AD520A.B"
[ir_translate] ERROR: : "AD520B.A"
Restored terminal settings
Remounting first music partition read-only
Remounting second music partition read-only
No secondary hard disk
...
-------------------------------------------------------------
What can i do?
Please help, I've to go in a 6 hours trip in 3 hours from now and i'm desperate.
Thanks, folks.
Thanks
Previous Topic
Index